Mac Rak


Mac Conestoga Materials is proud to be Ontario's newest distributor and installer of Mac Rak rack repair solutions. Mac Rak’s rack repair products are the solution for the repair and reinforcement of damaged frames.

We can save you money! By choosing to use the Mac Rak repair kits you stop the cycle of damaging, unloading, repairing, re-loading, damaging etc.

In most circumstances there is minimal down time and minimal rack unloading, we offer you a one of a kind solution that is configured to your existing racking system.

The Mac Rak repair products are designed to fit any type of rack, and will meet or exceed the original rack manufactures specifications. All of the Mac Rak products are custom made to answer your needs and repair your specific rack damages. We proudly offer a 5 year warranty on materials and workmanship. All post material is made from 50,000 PSI minimum yield high strength, 12 gauge or heavier steel. All repair kits are powder coated to the customer color choice. Paint specifications are subject to change on small orders. Some colors, may require an additional charge.

Conestoga Materials employs full-time, safety trained installation crews to assist with the installation of the Mac Rak repair kits.

Interested in learning more about Mac Rak repair products? Contact one of our Mac Rak experts to arrange an on-site demonstration.

Front Line Rack Repair

  • Returns front frame post to it’s near original condition.

  • Accommodates nearly all beam heights.

  • Reuses existing factory bracing or accommodates new bracing when needed.

  • Repair post is reinforced with a backing channel for added strength, which increases damage resistances by over 250%.

  • Manufactured with minimum, of 12 gauge steel.

  • Best used in narrow isle racking.

  • Best used when multiple lower beam levels exist.

  • Uses 1, 1/2 anchors.

Advantage Rack Repair

  • Returns front post to it’s near original condition with the addition of the Smac Kit® Bulldog to protect the lower 6” to 12” of the post from impact and twisting.*

  • Accommodates most beam levels above 12”.

  • Repair kit reuses existing factory bracing or accepts new bracing when needed.

  • Front post is reinforced with a backing channel for additional strength.

  • Manufactured with minimum of 12 gauge steel.

  • Uses 2, 3/4” anchors to minimize twist and to increase impact of the front post.

  • The Advantage repair kit is best used when accommodating multiple beam levels above 12" *

Bulldog Rack Repair

  • High impact, impact deflecting kit.

  • Does not require eliminating any factory bracing.

  • Option of welded or bolted installation.

  • Uses 2, 3/4" anchors for high impact and to eliminate frame post twist.

  • Can accommodate most beam levels 12” or higher depending on height ordered.

  • Reinforces the most vulnerable section of frame, the first 12” from the floor.

  • Protects all new or existing front frame posts.

  • Quick installation.

  • Not a wraparound post protector. This accessory becomes part of the post.

Elite Rack Repair

  • Double leg front frame post repair kit.

  • Bolted installation. Requires no field welding.

  • High impact, impact deflecting front post.

  • Requires 3, 3/4" anchors. Two on the front post to increase impact and shear and to minimize twist,
    and one anchor on back post.

  • Bolts thru existing holes in frame when possible, to make installation easy and fast.

  • Accommodates beam levels with factory welded or field bolted beam hanger brackets.

  • Available in straight leg and offset leg styles.

Elite Slant Leg Repair Kit

  • Slant leg kits can virtually eliminate lower rack damage by moving the front post 9" out of your aisle.

  • Medium-duty Slant Leg "Elite" places bottom front column 9" behind original location.

 

Max Guard Plus

  • The guard consists of a 4" high 3/8" thick deflector with one internal 3/4" anchor that is welded to your choice of 12", 18" or 24" standard height column. The frame is protected from fork lift out riggers by the 4" high deflector and the frame post above the defector is shielded against minor pallet and product damage by the column shield.

  • The Max Guard Plus column protector is the perfect solution to stopping lower frame damage caused by outriggers on straddle lift trucks.

End of Row Guard Column Protectors

  • The Mac Rak guard is 12” high made with ½” plate steel welded to 4” x 6” x 3/8” angle. 48” row end guards have 5, 7/8” holes to accommodate 3 to 5, ¾” anchors for the finest end of row protection available.

  • Row end guards are powder coat painted in standard safety yellow. Shipping weight is approximate 75 pounds per row end guard. Row end guards are available in left, right or double entry, in lengths to fit your specifications.

Anchors are available but not included.